Home / Products / LED UV Curing / UV LED Area Curing / Large Area UV LED Curing Lamp

Large Area UV LED Curing Lamp

Model: 400Y6 Series
365nm
385nm
395nm
405nm

The UVET Large Area UV LED Curing Lamp has a large UV irradiation field of 500 × 200mm for processes with big workpieces and large coated surfaces in industry, as well as multiple components on a single fixture. However it is a wide area exposure device which means that the need for repeated repositioning will be reduced when compared to smaller (UV) curing lamps.

The 400Y6 series comes in four different wavelength configurations: 365 nm, 385 nm, 395 nm and 405 nm. The intensities are measured and specified at 750 mW/cm² for 365 nm and 900 mW/cm² for the other three wavelengths. Using the fan cooling to dissipate heat means the unit can be used in industrial UV curing workstations.

Read More
Fan-cooled UV LED curing lamp housing with multiple cooling fans and carrying handles
Large area UV LED curing lamp control enclosure with front display and power switch
prev
next
Fan-cooled UV LED curing lamp housing with multiple cooling fans and carrying handles
Large area UV LED curing lamp control enclosure with front display and power switch
Request Quote

500 × 200 mm Large Irradiation Area

750 / 900 mW/cm² Specified UV Intensity

Fan Cooling Four Wavelength Models

Specifications

Part No. UVSS-400Y6 Wavelength 365 nm, Intensity 750 mW/cm²
Part No. UVSE-400Y6 Wavelength 385 nm, Intensity 900 mW/cm²
Part No. UVSN-400Y6 Wavelength 395 nm, Intensity 900 mW/cm²
Part No. UVSZ-400Y6 Wavelength 405 nm, Intensity 900 mW/cm²
Irradiation Area 500 × 200 mm
Heat Dissipation Fan Cooling
  • Descriptions
    xiajiantou

    The 400Y6 series provides a nominal irradiation area of 1,000 cm², making it a practical option for UV curing tasks that involve larger components or fixtures carrying several smaller parts. Its 500 mm length and 200 mm width offer more flexibility in arranging workpieces under the UV source.

    This configuration is particularly useful where a compact curing lamp would require several exposure positions. Actual curing performance depends on irradiance distribution, working distance, and the UV dose required by the material.

    Extended Coverage for Large Workpieces

    A larger irradiation field allows wider panels, flat assemblies, and coated substrates to be positioned within a single exposure setup. It also gives production engineers more room to arrange multiple components without relying on several small curing heads.

    For applications involving adhesives or coatings spread across a broad surface, the 500 × 200 mm format can simplify fixture positioning and reduce handling between exposure cycles. Irradiance should be measured across the intended working area to establish suitable process settings.

    Wavelength Options and UV Output

    Four dedicated models are available to accommodate different UV-curable formulations.

    The UVSS-400Y6 operates at 365 nm with a specified intensity of 750 mW/cm². The UVSE-400Y6, UVSN-400Y6, and UVSZ-400Y6 provide 900 mW/cm² at 385 nm, 395 nm, and 405 nm, respectively.

    Wavelength selection should follow the absorption characteristics of the adhesive, resin, ink, or coating being processed. Exposure time and delivered energy can then be established through material testing rather than relying on intensity figures alone.

    Fan Cooling for Industrial Installation

    The 400Y6 series uses forced-air cooling to dissipate heat generated during UV LED operation. Its ventilated housing allows airflow through the equipment, supporting thermal management without a separate liquid-cooling circuit.

    When installing the lamp above a workstation or production fixture, sufficient ventilation clearance should be maintained around the cooling openings. The mounting position, exposure distance, and electrical connections should be confirmed against the equipment specifications.

    Key Features

    Fan-Cooled Construction: Supports heat dissipation during industrial UV curing operations.

    500 × 200 mm Irradiation Area: Accommodates wider workpieces and large-format curing fixtures.

    1,000 cm² Nominal Coverage: Provides a broad exposure field for panels and grouped components.

    Four Wavelength Configurations: Separate 365, 385, 395, and 405 nm models for different UV-curable materials.

    Specified UV Intensity: 750 mW/cm² at 365 nm and 900 mW/cm² at 385/395/405 nm.

  • Applications
    xiajiantou

    1. Large-Panel UV Adhesive Bonding

    The 500 × 200 mm irradiation area supports UV adhesive curing on broad assemblies, bonded panels, and components with multiple adhesive locations. A larger exposure field can help reduce repositioning when bonding points are distributed across the workpiece. The adhesive formulation and exposure requirements must be compatible with the selected wavelength.

    2. UV Coating on Wide Surfaces

    Suitable UV-curable coatings can be processed on flat panels, sheets, and other extended surfaces. The rectangular exposure field accommodates wider coated areas than compact spot-curing equipment, while the required curing time depends on coating thickness, optical absorption, and measured irradiance at the surface.

    3. Electronics Assembly and Encapsulation

    For electronics production, the lamp can be evaluated for curing compatible UV adhesives, encapsulants, and protective coatings across larger circuit assemblies or fixture trays. Component shadows, coating thickness, and material sensitivity should be considered when defining the exposure process.

    4. Multi-Component Batch Curing

    Several small components can be arranged within the 500 × 200 mm irradiation field for batch processing. This arrangement may reduce individual handling and improve fixture utilization where parts have similar curing requirements. Workpiece spacing and irradiance distribution should be checked to establish consistent results.

    5. Industrial Printing and Resin Processing

    The broad irradiation field can be used to evaluate UV-curable inks, resin layers, and surface finishes on larger substrates. Applications may include printed panels and resin-coated components where the available wavelength and UV dose match the material. Production speed should be established through curing trials under actual operating conditions.

  • FAQs
    xiajiantou

    Q1. What is the irradiation area of the Large Area UV LED Curing Lamp?

    The 400Y6 series has a specified irradiation area of 500 × 200 mm, equivalent to a nominal coverage of 1,000 cm². It is suitable for evaluating UV curing processes involving wide workpieces, coated panels, and multi-part fixtures. Usable curing coverage should be confirmed at the intended working distance.

    Q2. Which UV wavelengths are available for the 400Y6 series?

    The series includes four separate wavelength models: UVSS-400Y6 at 365 nm, UVSE-400Y6 at 385 nm, UVSN-400Y6 at 395 nm, and UVSZ-400Y6 at 405 nm. Each model has a designated wavelength rather than combining all four wavelengths in one lamp.

    Q3. What UV intensity does the Large Area UV LED Curing Lamp provide?

    The 365 nm model has a specified intensity of 750 mW/cm². The 385 nm, 395 nm, and 405 nm versions are each specified at 900 mW/cm². Actual irradiance at the workpiece depends on the measurement distance and operating conditions.

    Q4. Can this lamp cure several components at the same time?

    Yes. Multiple components can be positioned within the 500 × 200 mm irradiation field when the fixture arrangement permits. The number of components that can be processed together depends on their dimensions, spacing, exposure requirements, and the measured distribution of UV light.

    Q5. Is the UV intensity uniform across the entire irradiation area?

    The specified irradiation area describes the nominal exposure field, not a guaranteed uniformity rating. Irradiance distribution should be verified at the intended working distance before setting curing parameters, particularly for large panels or fixtures containing multiple parts.

    Q6. Does the 400Y6 series require a water-cooling system?

    No. The 400Y6 series uses fan cooling for heat dissipation. Installation should provide sufficient clearance around the ventilation openings and follow the equipment's electrical and thermal operating requirements.

Related Products