The UVSS-280D4 series is a UV LED surface curing lamp featuring a 500 × 350 mm rectangular irradiation area. Its broad exposure field accommodates larger flat workpieces and multiple smaller components arranged within a shared fixture, making it suitable for industrial processes that require coverage across a wider surface.
Four wavelength configurations are available to match different UV-curable materials. The 365 nm version delivers a specified intensity of 300 mW/cm², while the 385 nm, 395 nm and 405 nm versions each provide 350 mW/cm². Fan cooling manages heat generated during operation, supporting integration into industrial UV curing equipment and production setups.
| Part No. UVSS-280D4 | Wavelength 365 nm, Intensity 300 mW/cm² |
| Part No. UVSE-280D4 | Wavelength 385 nm, Intensity 350 mW/cm² |
| Part No. UVSN-280D4 | Wavelength 395 nm, Intensity 350 mW/cm² |
| Part No. UVSZ-280D4 | Wavelength 405 nm, Intensity 350 mW/cm² |
| Irradiation Area | 500 × 350 mm |
| Heat Dissipation | Fan Cooling |
The 280D4 series provides a 500 × 350 mm rectangular irradiation field for surface curing across wider workpieces. The extended coverage allows multiple components to be positioned within the same exposure area, reducing the need to reposition individual parts when the fixture layout is suitable.
Its four wavelength configurations offer flexibility when working with different UV-curable formulations. The appropriate model should be selected according to the material's spectral response and required curing dose. Working distance, exposure time and irradiance distribution across the target area should also be evaluated during process setup.
A 500 × 350 mm exposure area provides a wider working field for flat materials, assembled components and production fixtures. Compared with narrow-format UV LED lamps, this configuration accommodates a greater range of component arrangements within one irradiation zone.
For batch processing, several smaller parts can be positioned together under the same light source. The actual usable curing area depends on component dimensions, spacing, working distance and the distribution of UV energy across the illuminated surface.
The UV LED surface curing lamp is available in four models, covering commonly used UV wavelengths from 365 nm to 405 nm.
Each wavelength interacts differently with UV-curable materials. Selection should be based on the photoinitiator response and curing requirements of the adhesive, resin, ink or coating. The specified intensity alone does not determine curing speed; exposure dose and material characteristics also matter.
The 280D4 series uses fan cooling to dissipate heat generated by the UV LED assembly during operation. Ventilation openings in the enclosure support airflow and help maintain the intended thermal management conditions.
During equipment installation, ventilation paths should remain unobstructed. Adequate clearance around the housing is also important for airflow and routine equipment maintenance.
1. UV Adhesive Curing
The 500 × 350 mm irradiation field can be evaluated for UV adhesive curing on flat assemblies, larger bonded components and multi-part fixtures. Wavelength compatibility and the required UV dose should be confirmed against the adhesive manufacturer's technical specifications.
2. UV Coating and Resin Curing
The broad exposure area provides coverage for UV-curable coatings and resin layers applied across wider surfaces. Material thickness, surface characteristics, exposure distance and irradiance distribution should be considered when establishing curing conditions.
3. Electronics Assembly
Electronics manufacturing processes involving UV-curable adhesives, encapsulants and protective coatings may benefit from a wider exposure field. Multiple components can be positioned within the irradiation area, subject to fixture design and material compatibility.
4. Industrial Printing and Surface Finishing
The lamp can be evaluated for selected UV-curable inks and surface finishes applied to flat or relatively wide substrates. The selected wavelength must match the ink or coating formulation, while exposure conditions should be validated against the required production results.
5. Batch Curing and Fixture-Based Processing
Multiple smaller components can be arranged within the 500 × 350 mm irradiation field for batch exposure. Fixture spacing, component orientation and potential shadowing should be checked to maintain suitable UV exposure across the working area.
Q1:What is the irradiation area of the UV LED Surface Curing Lamp?
The 280D4 series has a rectangular irradiation area of 500 × 350 mm. This configuration provides a broad exposure field for larger flat workpieces and multiple smaller components arranged within a fixture. Actual curing coverage should be verified at the intended working distance.
Q2:Which wavelength options are available?
Four wavelength configurations are available: UVSS-280D4 at 365 nm, UVSE-280D4 at 385 nm, UVSN-280D4 at 395 nm and UVSZ-280D4 at 405 nm.
Q3:What UV intensity does the 280D4 series provide?
The 365 nm model is specified at 300 mW/cm². The 385 nm, 395 nm and 405 nm models are each specified at 350 mW/cm². Measurement distance and test conditions should be confirmed when evaluating operating performance.
Q4:How does the UV LED lamp dissipate heat?
The 280D4 series uses fan cooling. Its ventilation openings should remain clear during operation to maintain airflow and support heat dissipation.
Q5:Can the lamp cure multiple components at the same time?
Yes. Multiple components can be arranged within the 500 × 350 mm irradiation field when their dimensions and fixture layout permit. Component spacing, shadowing and UV intensity distribution should be evaluated to verify consistent curing conditions.
Q6:How do I select the correct wavelength?
Select the wavelength according to the UV-curable material's photoinitiator response and curing requirements. The material manufacturer's technical data, required UV dose and actual exposure conditions should guide the final selection.